Joined in 2023 
82 
63 About this deal
Always try a small test area first just to establish dwell time. On multi-layered paint apply liberally with a paint brush and covering with plastic film and leave overnight. Covering with plastic film traps out the air preventing it drying out making it work for much longer, plus it forces the product down through the substrate stopping any blistering which can lift the product from the surface stopping it working. The best products to use in the range are EcoSolutions Paint & Varnish remover or Graffiti go. Hope this helps! TTB Supplies About Eco Solution X-Tex
Most DCM-free paint strippers have just replaced one hazardous solvent with another, but technology removes the hazardous solvent content and replaces it with water. A safer alternative for you and your family. As you may be aware there are quite a few products of this kind on the market. The most common of these come in the following forms: Gel Type Paint Stripper Eco Solutions‘ products are all safe-to-use, water-based, non-toxic products and there is one for most jobs whether you are upcycling, cleaning or stripping in your home or commercially.
There are no dangerous fumes when using Home Strip® Paint & Varnish Stripper as it is a water-based, non-toxic and solvent-free formula that has been researched and developed to ensure it isn’t harmful when used. How do I use Eco Solutions Home Home Strip® Paint & Varnish Stripper for Removing Varnish from Cabinets? You should start by washing the surface with warm soapy water to remove any dirt and dust and then wipe it dry with a microfibre cloth. Next, you use the heat gun to soften the varnish, always read the instructions and start on a lower heat setting first so you know it is not going to be too hot, you can increase the heat if it isn’t softening the varnish as you need it to. Focus on one area at a time and when the varnish has softened you then use a scraper to scrape it away whilst it’s still soft, be really careful when doing this so you don’t try and scrape away the hard varnish underneath as this will damage the surface you are trying to get to. When you have done this you can then move onto the next area of varnish. If there are several layers of varnish that have been painted over, again and again, you will need to repeat the process a few times. There will be some areas of varnish that are difficult to reach and for these, you will need to use the sandpaper guide to remove. When all the varnish has been removed you should wash the surface with warm soapy water to remove any dust and then leave it to dry completely before you treat the original surface with anything else. Again, it a long and laborious job removing varnish with a heat gun so give yourself enough time and you will definitely need a lot of patience. Removing Varnish with Eco Solutions Home Strip® Paint & Varnish Stripper If you are interested in purchasing Home Strip™ Paint and Varnish Remover then it is available from our very own toolstore.
Leave the Home Strip on the surface for about 40 minutes and then test a small area to see if the paint is ready to come off. The scraper you use should simply slide under the paint or varnish and a little elbow grease may be needed. The video shows an extensive test where we tried to remove 4 coats of paint in one go but by applying a little less Home Strip and being a bit more patient, you can remove the 4 coats in two attempts. Home Strip and Lead Based PaintsHome Strip™ is ideal for use by do-it-yourself enthusiasts, as well as professional users. Economical to use – Goes further than hazardous solvent based strippers – Minimal VOC content (0.000004%, as certified by independent laboratory detection test) It’s also very easy to get carried away and go past the surface you are trying to remove and burrow into the surface below as some machines can be quite aggressive. It can also be difficult to work on shaped or decorative items.
Related:
Great Deal 
New Comment