Aerials, Satellites and Cables Coax Cable Tester - 100m Range

Product Information

Your search for the most efficient Coax tester kit might just end here. This Klein Tools Coax Explorer 2 is perfect for verifying the continuity of F connector coaxial cables and for determining their location as well. There are four color-coded remotes to attach to the other ends of the cables and map them. If the other end of the coax cable is connected to a satellite dish or antenna on your roof, you can use a multimeter & aluminum coil to trace the right ends of a specific coax cable.

Connect the negative end of the multimeter probe to the center wire/pin at one side of the coax, ensuring it’s not touching the outer layer. Connect the positive end of the multimeter probe to the center wire/pin at the other side of the coax. There are two ways to test a coax cable without a multimeter. There is an easier way that uses a more sophisticated coax signal tester. If you don’t have the signal tester, you have no option but to go for a more tedious way; using your cable modem. In this section, we’ll see the steps involved in both methods. Testing Coaxial Cable with the Coax Signal Tester If you have access to a cable tester that can identify the location of damage, connect your cable to the tester and run the test. You can use a cable modem with an active internet service to test cable outlets or signals from the coax cables. The only hardship is moving the modem around. Tester sends a current and a voltage down the connection. Resistance testing is measuring a voltage and current, it calculates a resistance. What is a typical application of Network Cable Testers?The shield continuity test: Shields are essential to reduce interference. Testing the continuity in the shield at different ends ensures the shield layer is intact. It prevents outside interference and signal leaks. For different data that can be transmitted over the Ethernet network data cables. Testers are suitable for testing computer Cat 3C, Cat5, Cat5e, Cat6, Cat6a, Cat6e, Cat 7 cables. They can also be used for testing and confirming the correct installation of telephone lines, all kinds of RJ45 fitted cables, LAN cables, and some models even coaxial cables. Network testers can be found in areas such as: If the coaxial cable fails in any of these tests, it is at fault and warrants a replacement. Why do they happen?

You also get a very convenient case for carrying all the tools in an organized way. This coaxial cable tester is capable of testing voice data and video (F-connector) coax connections. The LCD screen on the remote shows you the length of the cable, wire maps, cable ID, and other test results.

All Videos in This Series

Touch one lead to the outer metal part of the PL-259 plug and the other to the center pin. If you don’t hear any sound, then the coax is not shorted. You can test your coax outlet’s signal by taking your cable modem from cable outlet to cable outlet manually, and plugging it in to each coax outlet to verify a signal and connectivity. If your internet modem connects like normal, that means a signal was detected. If it doesn’t connect, then you have no signal. This method of moving a modem from place to place can be very time-consuming.